Slinger EP Flying Wing ARF Basic

This is the Radio Controlled, Electric Powered, Great Planes Slinger Almost Ready-to-Fly Expanded Foam Flying Wing Kit For Intermediate to Advanced Modeler/Fliers. FEATURES: Construction: Expanded foam, is resistant to rip, bend, and break Wings: One piece foam with ABS plastic winglets to add stability covered in heat shrink film Motor: Speed 400 size with prop Radio compartment: concealed underneath ABS center section Assembly Time: Approximately 30 minutes Warranty: Great Planes Model Manufacturing Company guarantees this kit free from defects in both materials and workmanship at date of purchase. INCLUDES: Speed 400 motor with two props, two wing halves, center section, canopy, Velcro tape strip, pushrods with tubes, wing fins, decals, control horns, battery connector, photo-illustrated instructions, nylon tie strap, wing tape, and center section tape. REQUIRES: Battery: 8 cell, 1800mAh (GPMp0345) Charger: GPMM3001 or GPMM3150 **to use either charger, adapters will need to be made. See Completion Guide for details** Radio: 3 or 4 channel w/electronic mixing(or optional mixer GPMA2428) Servos: 2 mini (min. of 15 oz-in torque) Speed Control: 15A Electronic (GPMA2429) Glue: 6 minute epoxy (GPMR6042) Misc. Items: Building and Field Equipment SPECS: Wingspan: 47.4" (1204mm) Wing Area: 462.8sq in (29.85sq dm) Weight: 27oz (765g) Wing Loading: 8.4 oz/sq ft (25.6 g/sq dm) Center of Gravity: 8" (203mm) Back from front tip of plane inverted Control Throws: Low Rate High Rate Elevator, up and down: 3/8" (9.5mm) ½" (12.7mm) Ailerons, up and down: ½" (12.7mm) ¾" (19mm)