Great Planes Silver Series 8A Brushless ESC 5V/1A BEC GPMM1800

This is the ElectriFly Silver Series 8A Brushless Electronic Speed Control. / / FEATURES: Compatible with NiCd, NiMH and LiPo batteries / Auto-detects input volts and sets Low-Voltage cutoff / 8.5kHz switching frequency, for good run-time and cool operation / Pre-installed Universal radio connector* (see Comments below) / Pre-installed polarized micro connector for battery / Pre-installed gold plated 2mm female bullet connectors for motor / High powered BEC (Battery Eliminator Circuitry) which handles 2 or 3 / micro servos (4 if adequate airflow is provided) / Full proportional forward and smooth throttle response with ON/OFF / brake / Safe Start System** (see details in Comments below) / Thermal Protection stops motor when maximum temperature 230°F / is reached / / INCLUDES: One Brushless ElectriFly Silver Series 8A Speed Control with / pre-installed receiver connector, battery connector, and motor / connectors. / / REQUIRES: Installing in airplane and connecting to receiver, battery and motor / / SPECS: Length: 1.18" (30mm) / Width: .79" (20mm) / Height: .24 (6mm) / Weight: .39oz (11g) / Input Voltage: 6-12 cells NiCd/NiMH / 2-4 cells LiPo / (20V input w/o BEC) / Output Current: 8A continuous maximum / 10A surge maximum / Max Output Power: 100 watts / On-resistance: 0.05 ohms / Operating frequency: 8.5kHz / BEC: 5V/1.5A / Low Voltage Cutoff: Battery voltage x 0.67 / Thermal Cutoff: 230°F (110°C) / Timing Angle: 12° / Brake: ON/OFF / / Typical Application: Great for small, lightweight, high performance airplanes / from flat-foams to built-up 3Ds. Great for Outrunner / style Brushless Motors, delivering 8A of continuous / current with a built-in Battery Eliminator Circuit which / can handle 1.5A. Simple to use and very affordable.