The S148 Standard Servo yields increased power and speed with a reduced size / and weight compared to the S128, yet uses the same gears and servo cases. / This servo is a replacement for the following servos.(S6,S17,S18,S23,S26,S28 / S38,S128) / / This servo can produce high-current draw from your batteries. / If using NiMH or LiPo batteries, make sure they are capable / of delivering sufficient amps. / / INCLUDES: One S148 Standard Precision Servo w/"J" connector and metal top / bushing / One accessory package with round rubber grommets, brass eyelets, / mounting screws, round and star shaped servo horn / Nylon gears / One year warranty / / SPECS: Control system: Pulse width control, 1.52ms neutral / Motor: 3-pole / Power requirement: 4.8V or 6V (from receiver) / Power consumption: 6V 8mA (at idle) / Torque: 33.3 oz-in @ 4.8V or 41.6 oz-in @ 6V / (2.4 kg-cm @ 4.8V or 3 kg-cm @ 6V / Transit Time: .28 sec/60° @ 4.8V or .22 sec/60° @ 6V / Length: 1.6" (41mm) / Width: .8" (20mm) / Height: 1.4" (36mm) / Weight: 1.6oz (44.4g) / Mounting on-center dimensions - / Width: .4" / Length: 1.9" / Shaft Diameter: 5.88mm
