2.4Ghz 4-Channel Radio Remote Control Electric Phoenix1600

Product Review

Specification(Brushless version): Wingspan: 1600mm Length: 1160mm Flight weight: 800g Battery: 11.1V 1100mAh Li-Po Motor: 2812/ 1250KV Out runner Brushless motor ESC: 30A Brushless ESC FM 4-Channel / 2.4G 4-Channel proportional radio control system Radio control distance:300m / 600m(2.4G) Material:EPO

Product Features

2.4GHz 4-Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle)
Skyrider is a glider which has a blow plastic fuselage and EPO wing, so it will be more shock-resistant not easy to be broken.
As it has a 1.6 meter wingspan, the wing area is big, so it is good at gliding
It has two long aileron has a high performance for making many kinds of action
The whole plane is assembled by screw, the best way to assemble for beginners

Customer Reviews

Average Customer Review

(1 customer review)

Phoenix 1600 glider, April 27, 2012

timmy - See all my reviews

= Durability: = Fun: = Educational:

Amazon Verified Purchase(What's this?)

This review is from: 2.4Ghz 4-Channel Radio Remote Control Electric Phoenix1600 Air Glider R/C Airplane RTF w/Brushless Set up + EPO Durability (Toy)

So, apparently this glider is not very common, the phoenix 2000 and the 16/2.6 convertible phoenix however is much more common, just look at them on youtube, and this glider is pretty identical to it, as far as i can tell.. Assembly is quite easy, but there are no instructions. The manual glosses over many things but you just have to think logically and be prepared to improvise. I didn't have any experience with RC planes and i managed to build it.

The fuselage is from a sturdy and well-manufactured nylon plastic mold (i think radians have epo bodies, right??), and the wings are EPO (light, foam, do not step on it or bump it, i bumped the tail and almost broke off the rudder before i even flew it). There are rods to strengthen the wings and tail fins. The servos, receiver, ESC, and motor are pre-installed, as well as the pushrods to the tail. you just have to mount all the little plastic platforms for the servos and put the tail + wings together, then connect the aileron...Read more